Roland DWX-42W Plus Wet Dental Mill - Chairside Milling Solution

Roland DWX-42W Plus Wet Dental Mill - Chairside Milling Solution

USD 11,998.00
Brand:
Product Code: R328790
Availability: In Stock
Viewed 210 times

Product Description

Roland DWX-42W Plus Wet Dental Mill - Chairside Milling Solution

SPECIFICATIONS

Model
DWX-42W Plus

Millable material

Glass ceramics, Composite resin, PMMA

Loadable workpiece shape

 Width: Maximum 40 mm
 Depth: Maximum 20 mm
Height: Maximum 20 mm

Operating speed

0.24 to 70.9 in./min. (6 to 1,800 mm/min.)

Spindle speed

15,000 to 60,000 rpm

Rotary axis travel angle

A axis: ±360°

Number of burs housed

6

Attachable bur

Shank diameter: 3 mm, dedicated milling bur

Compatible compressed air

Control Pressure: 0.3 MPA or more
      Air Capacity: 39 L/min or more

Interface

USB

Control command set

RML-1, NC code

Power requirements

AC 100 to 240 V ± 10%, 50/60 Hz (overvoltage category II, IEC 60664-1), 2.1 A

Power consumption

Approximately 190 W

Operating noise

During operation: 70 dB(A) or less (when not cutting)
  During standby: 48 dB(A) or less

External dimensions

Width x Depth x Height: 19.0 x 22.0 x 23.6 in. (482 x 560 x 600 mm)

Weight

135 lbs. (61 kg)

Installation environment

Indoor use, Altitude: Up to 6,562 ft. (2,000m)
Temperature : 41 to 82° F (5 to 28° C)
Humidity: 35 to 80% RH (no condensation)
Ambient pollution degree: 2 (as specified by IEC 60664-1)
Short-term temporary overvoltage: 1,440 V
 Long-term temporary overvoltage 490 V

Included items

Power cord, USB cable, Roland DG Software Package
CD, setup guide, drain hoses, dedicated milling burs (4), detection pin,
dummy pin, rotary axis correction jig, ATC magazine
correction jig and screw, hexagonal screwdriver, hexagonal wrench, measuring cup,
mounting screws (4), milling bur removal jig, coolant tank,
waste receptacle, filters (2), regulator with stay and screws (2),
maintenance kit, daily maintenance card, 6 mm air hose,coolant
additive, MillBox CAM software, Ethernet cable

Write a review

Note: HTML is not translated!
    Bad           Good

Standard Shipping : This machine qualifies for Free Shipping.

Processing Time    : 1-2 business days

Handling Time       : 3-5 business days

Delivery Time        : 7-14 business days

All shipments are insured and trackable. Local pickup is available upon request. We are located in Jl.Amal No.75,Sunggal,Kec.Medan Sunggal,Kota Medan,Sumatera Utara 20127.

If you prefer your shipment to be palletized and crated, we offer this service at an additional charge. Please contact us for arrangements.